Myron-l 6PFCE and 4P Manuel d'utilisateur télécharger pdf (Page 31)

format location. The display will show a “C” or “F”

(see Figures 18 and 19).

Figure 18

Figure 19

4. Press to switch units.

5. Press to accept unit preference for all temperature

readings.

NOTE: Tempco will still be shown in %/°C

XII. TOTAL RETURN to FACTORY SETTINGS “FAC SEL”

There may come a time when it would be desirable to quickly reset

all the recorded calibration values in the instrument back to the factory

settings. This might be to ensure all calibrations are set to a known

value, or to give the instrument to someone else free of adjustments or

recorded data for a particular application.

NOTE: All stored data will be lost.

1. Press

2. Press to display the stored memory records.

3. Press repeatedly

Figure 20

until you pass the CLr ALL

and the C-F locations. The

display will show a “FAC

SEL” (see Figure 20).

4. Press to accept the resetting. Display will return to

Conductivity.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 55 56

Pas de commentaire

Myron-l 6PFCE and 4P Manuel d'utilisateur Page 31